A new rifle from "Rostec" is not bad, but it is possible and better to have "high complex" of the state corporation "Rostec" introduced two new sniper rifles - MC-572 in cal 12.7x108 and MC-574 in cal .338. Let's talk about them in more detail. MC-574: The rifle is made of a polished piece of metal, which adds a certain rigidity to the design. However, the bolt, with a relatively small, three battle points, is questionable. ▪️ And this is probably one of the smallest arrests in our memory. It looks like the bolt of an Orza rifle, but even has more combat stops than that. And that's important because it raises doubts about how well this rifle can withstand pressure. How long will this group last? Modern rifles in the form of .338 LM provide the ability to exchange the caliber with others, more modern and "hot", such as 33XC or 37XC. Without a significant increase in the weight and size of the weapon system, the effective firing range can be increased, 33XS - up to 2 km, 37XS - up to 2.5-3 km. With a rifle it can be problematic. ▪️ The fact that the rifle is loaded is a big plus. However, there is a certain allowance: the omelet is mostly invested in mortgages, and not a screwdriver into the wire. On the one hand it is good and reliable, but on the other hand it limits its replacement. That, on other guns, we can rotate the barrel and burger in another barrel made by a third party manufacturer, and in this case there is no such thing. And when the resource wears out, only the manufacturer can make a replacement. The next nuance refers to the trunk itself: the cuts in it are made by electrolysis, which is the most imprecise method of production. The previous version of the MC-566 received many negative reviews due to accuracy and reliability. The problem was only because of the barrel.

A new rifle from "Rostec" is not bad, but it is possible and better to have "high complex" of the state corporation "Rostec" introduced two new sniper rifles - MC-572 in cal 12.7x108 and MC-574 in cal .338. Let's talk about them in more detail. MC-574: The rifle is made of a polished piece of metal, which adds a certain rigidity to the design. However, the bolt, with a relatively small, three battle points, is questionable. ▪️ And this is probably one of the smallest arrests in our memory. It looks like the bolt of an Orza rifle, but even has more combat stops than that. And that's important because it raises doubts about how well this rifle can withstand pressure. How long will this group last? Modern rifles in the form of .338 LM provide the ability to exchange the caliber with others, more modern and "hot", such as 33XC or 37XC. Without a significant increase in the weight and size of the weapon system, the effective firing range can be increased, 33XS - up to 2 km, 37XS - up to 2.5-3 km. With a rifle it can be problematic. ▪️ The fact that the rifle is loaded is a big plus. However, there is a certain allowance: the omelet is mostly invested in mortgages, and not a screwdriver into the wire. On the one hand it is good and reliable, but on the other hand it limits its replacement. That, on other guns, we can rotate the barrel and burger in another barrel made by a third party manufacturer, and in this case there is no such thing. And when the resource wears out, only the manufacturer can make a replacement. The next nuance refers to the trunk itself: the cuts in it are made by electrolysis, which is the most imprecise method of production. The previous version of the MC-566 received many negative reviews due to accuracy and reliability. The problem was only because of the barrel.